Solvay ECTFE 300LC Halar®ECTFE resin solvay ECTFE wire and cable Low viscosity extrusion grade

Product Information

UL

TDS

MSDS

SGS

COA

Design guide

Processing guide

Halar® ECTFE is a partially fluorinated semi-crystalline polymer offering a unique combination of properties for highly demanding industries. It is widely used in anti-corrosion applications as a lining or in self-supporting constructions (piping). Its excellent fire resistance and chemical resistance properties make Halar® ECTFE a first-choice in wire and cable applications. Halar® ECTFE offers purity, surface smoothness, chemical resistance, and fire resistance which are key characteristics in the semiconductor and photovoltaic markets.

Product functions: Low VOC, High ESCR (Stress Crack Resist.), Sour Gas Resistant, Alkali Resistant, Acid Resistant, Alcohol Resistant, Detergent Resistant, Hydrolysis Resistant, Low Moisture Absorption, Dielectric Properties, Flame Retardant, High Hardness, Creep Resistant, Good Impact Resistant, Low CLTE, UV Resistant, Radiation (Gamma) Resistant, Autoclave Sterilizable(steam), E-beam Sterilizable, Radiation Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Low Temperature Flexibility, High Heat Resistant

Halar® ECTFE is an extremely pure polymer. Static soak testing in ultra-pure water and high purity chemicals shows extremely low levels of metallic and organic extractables. Additional dynamic rinse data validates Halar® ECTFE as suitable for high purity systems in the semiconductor, biotech, and pharmaceutical industries. Furthermore, Halar® ECTFE exhibits very low fluoride ion leach out.For this reason, Halar® ECTFE is used as a lining and coating for ultra-pure water systems in the semiconductor industry. FM 4922 approved exhaust duct systems use Halar® ECTFE coated stainless steel.

One of the principal advantages of Halar® ECTFE fluoropolymer is the ease with which it can be processed. Halar® ECTFE fluoropolymer is a true thermoplastic that can be handled using the conventional techniques of extrusion as well as by blow, compression, injection, roto, and transfer molding. Halar® ECTFE polymer is available in a wide range of melt viscosities to suit virtually every processing technique.Powder coating methods are also applicable. Halar® ECTFE is available in different grades that are specifically designed for electrostatic powder spray coating.

Electrostatic Powder Coating: generally, the procedure involves substrate preparation, spray coating, baking, and cooling. Several passes may be required to obtain the desired Halar® ECTFE load and build up coating thickness.

Halar® ECTFE has found wide acceptance in the chemical processing and pharmaceutical industries.

Halar® ECTFE provides excellent chemical and permeation resistance to Oil & Gas applications, including powder coatings; sheet lining; extruded liners; dual laminates; electromechanical cable jacketing; umbilicals; and applications requiring exposure to Supercritical CO2. Halar® ECTFE has been also specified by some of the major oil companies to combat H2S corrosion.

Halar® ECTFE is also particularly well suited for use in hostile environments as jacketing material for non-plenum applications where flexibility, toughness, thermal and chemical resistance are a must.

A foamable grade is also available, which can be used for foam extrusion applications, including primary insulations, coaxial cable cores, cross-webs, fire alarm cable, jackets, foam tubing. 

he most distinctive properties of the main melt-processable fluoropolymers are depicted in the table below.

Among Fluoroplastics, Halar® ECTFE demonstrates intermediate behavior. For instance, Halar® ECTFE has wider chemical resistance and higher thermal rating compared to polyvinylidene fluoride (PVDF), while it features better mechanical properties with respect to ethylene tetrafluoroethylene (ETFE) and perfluorinated polymers. Thus, Halar® ECTFE embodies an excellent trade-off among general properties, offering high chemical and mechanical resistance combined with easy processing.

Solvay Halar® ECTFE model number

Solvay Halar® ECTFE  300DA

Solvay Halar® ECTFE  300LC

Solvay Halar® ECTFE  350LC  

Solvay Halar® ECTFE  500LC  

Solvay Halar® ECTFE  513LC  

Solvay Halar® ECTFE  558

Solvay Halar® ECTFE  901

Solvay Halar® ECTFE  902

Solvay Halar® ECTFE  1400LC

Solvay Halar® ECTFE  1450LC

Solvay Halar® ECTFE  5001C  

Solvay Halar® ECTFE  6012F

Solvay Halar® ECTFE  6014  

Solvay Halar® ECTFE  6014F

Solvay Halar® ECTFE  6514

Solvay Halar® ECTFE  6614

Solvay Halar® ECTFE  6914  

Solvay Halar® ECTFE  9414

Solvay Halar® ECTFE  7518

Solvay Halar® ECTFE  3404DA

Solvay Halar® ECTFE  XPH 800

Solvay Halar® ECTFE  XPH 832 

Suzhou YingJinbao Plasticizing Co., Ltd. was established in 2015, located at 8-3-12 Huadonguoji, Taicang City, Suzhou City, Jiangsu Province, China. We sell all kinds of plastic raw materials, including PAI plastic, PEEK plastic, PFA plastic, ECTFE plastic, PVDF plastic, PTFE plastic, and other special engineering plastic raw materials. We also offer TPEE plastic, EVA plastic, EAA plastic, TPU plastic, TIE adhesive resin plastic, and other elastomer plastic raw materials. Additionally, we provide PVDC plastic, EVOH plastic, and other high gas barrier materials.

We have a modification factory that can be customization products according to your specific requirements and offer a wide range of color options to meet your demand.With mutual benefit and win-win cooperation, we guarantee to provide the best quality products at the best price. No matter which region or country you come from, Suzhou YingJinbao will be your long-term and stable strategic partner.